Coaster Map

Talon

Dorney Park · Allentown, Pennsylvania

Height requirement: 54 in (137 cm); top speed 58 mph; 135 ft tall; 4 inversions; opened 2001.

Talon is a steel inverted roller coaster at Dorney Park in Allentown, Pennsylvania, built by Bolliger & Mabillard. It opened on 5 May 2001. The ride stands 135 ft tall, drops 120 ft, reaches 58 mph and runs 3,110 ft of track. On an inverted coaster the seats hang below the track, so riders' feet dangle free with nothing beneath them. It turns riders upside down 4 times.

What riding Talon is like

At 135 ft tall with 3,110 ft of track, Talon balances height and length: a main drop followed by a full circuit of hills and turns. It goes upside down 4 times across 3,110 ft of track, so inversions are spaced out between other elements.

Opened in 2001, it is the 5th oldest of the 8 coasters we list at Dorney Park.

Its 54 in minimum is the strictest at Dorney Park, shared with 1 other coaster. Among extreme-class coasters on Coaster Map the median ride-alone minimum is about 51 in (130 cm), so this rule is higher than is typical for its class.

Going by RCDB's map positions, Talon sits on the east side of Dorney Park's coaster line-up. The nearest other coaster is Wild Mouse, roughly 140 m away (48 in minimum), so the two are easy to ride back to back. Next closest is Woodstock Express at about 210 m. Distances are straight-line estimates from map coordinates, not walking routes.

Written from RCDB statistics and the park's published height rule; it describes the layout, not a review.

Talon layout, trains and ride system

Trains climb a chain lift hill.

RCDB lists 5 track elements for Talon, shown here in the order RCDB lists them:

  1. Chain Lift Hill
  2. Loop (98 ft tall)
  3. Zero-G Roll
  4. Immelmann
  5. Corkscrew

Talon trains and ride system

Trains2 trains with 8 cars per train. Riders are arranged 4 across in a single row for a total of 32 riders per train.
Riders per train32
Hourly capacity (RCDB)1,200 riders per hour
DesignerIng.-Büro Stengel GmbH

On kid height: it appears on our 54-inch list as a ride-alone coaster.

Elsewhere, Bolliger & Mabillard also built Black Mamba (Phantasialand), OzIris (Parc Astérix), Patriot (Worlds of Fun) and Silver Bullet (Knott's). See all Bolliger & Mabillard coasters.

From the RCDB entry for Talon; elements are RCDB's list, not a ride-by-ride account.

Talon stats

Minimum height54 in (137 cm)
Park thrill rating5 of 5
Height135 ft
Drop120 ft
Top speed58 mph
Track length3,110 ft
Inversions4
Steepest drop angle50°
Opened5 May 2001
ManufacturerBolliger & Mabillard
ModelInverted Coaster / Custom
TypeSteel, Inverted, Extreme

How intense is it?

Intense (extreme)

RCDB classes it as an extreme coaster; Dorney Park rates it 5 out of 5 on its own thrill scale.

Who is it for?

It suits confident thrill seekers who are comfortable with big forces and riders happy to go upside down 4 times. Riders must be at least 54 in (137 cm) tall.

Best seat to ride

On this style of coaster, the front row has nothing in your line of sight, and the outermost seats feel the most exposed. Riders after the strongest drops pick the back row, which is pulled over each crest faster.

General guidance from how this style of coaster moves, not a park rule. See best seat on a roller coaster.

How Talon compares

On our intensity ranking Talon is number 4 of 8 at Dorney Park, where 1 is the most intense. It is the 4th tallest of the park's 8 coasters with a listed height.

If it sounds like too much, the next gentler coaster here is Steel Force (200 ft tall, 75 mph, no inversions; 48 in minimum). Ready for more? The next step up is Possessed (185 ft tall, 70 mph, no inversions; 52 in minimum).

Site-wide, Talon is taller than 84% and faster than 78% of the 1486 coasters we cover that have a listed figure.

If you liked Talon, try

The closest matches at other parks on Coaster Map, by type, class, builder, height, speed and inversions, with one pick within about 700 km where there is one:

  • Great Bear at Hersheypark: the same Bolliger & Mabillard Inverted Coaster / Custom model; also inverted; 90 ft tall, 58 mph, 4 inversions; 54 in minimum
  • Patriot at Worlds of Fun: the same Bolliger & Mabillard Inverted Coaster / Custom model; also inverted; 149 ft tall, 60 mph, 4 inversions; 54 in minimum
  • OzIris at Parc Astérix: the same Bolliger & Mabillard Inverted Coaster / Custom model; also inverted; 131.2 ft tall, 55.9 mph, 5 inversions; 130 cm minimum

Pins show approximate ride positions from RCDB map coordinates. Map data © OpenStreetMap contributors. A text list of every coaster is below the map.

Before you ride Talon

  • Measure first: the ride-alone minimum is 54 in (137 cm). Height is checked at the entrance, so ask the ride team before you queue if your child is close.
  • Secure glasses, phones and loose items before the 4 inversions; the park posts its loose-article rules at the ride.
  • Opening times and ride status: check the Dorney Park app or official site on the day.

Planning for a child? The ride height checker shows every coaster they can ride at Dorney Park.

Keep reading

Frequently asked questions

What is the height requirement for Talon?

Riders must be at least 54 in (137 cm) tall to ride Talon, according to Dorney Park, official ride page (checked 10 Nov 2026). Requirements can change, so confirm at the ride entrance.

How tall is Talon?

Talon is 135 ft tall, with a drop of 120 ft, according to RCDB.

How fast does Talon go?

Its top speed is 58 mph (93 km/h), according to RCDB.

Does Talon go upside down?

Yes. It has 4 inversions.

Is Talon scary?

It depends on the rider, but on intensity: RCDB classes it as an extreme coaster; Dorney Park rates it 5 out of 5 on its own thrill scale. That is RCDB's most intense class.

When did Talon open?

Talon opened on 5 May 2001.

Who built Talon?

Talon was manufactured by Bolliger & Mabillard.

How long is the track on Talon?

RCDB lists 3,110 ft (948 m) of track.

How does Talon get up its first hill?

RCDB lists a chain lift hill; it has no launch.

How many people ride Talon at once?

RCDB's train details give 32 seats per train. RCDB lists an hourly capacity of about 1,200 riders.

Is Talon good for first-time riders?

On the numbers: RCDB classes it as extreme; it goes upside down 4 times; it tops out at 58 mph; the minimum height is 54 in. Most first-timers start with a family-class ride with no inversions, so this is better as a step up than a first coaster.

More coasters at Dorney Park

Sorted by ride-alone height, with the lowest height allowed with a companion and any maximum from the official rules.

See the full Dorney Park coaster guide and map

Related guides

Sources

Last checked 10 Nov 2026. Found an error? Tell us.

New coaster alerts

Get a short email when we add a park or a new coaster opens. No spam; unsubscribe anytime.