Steel Force
Dorney Park · Allentown, Pennsylvania
Height requirement: 48 in (122 cm); top speed 75 mph; 200 ft tall; 0 inversions; opened 1997.
Steel Force is a steel sit-down roller coaster at Dorney Park in Allentown, Pennsylvania, built by D.H. Morgan Manufacturing, Inc. It opened on 30 May 1997. The ride stands 200 ft tall, drops 205 ft, reaches 75 mph and runs 5,600 ft of track. That height makes it a hyper coaster (200 to 299 ft tall). It does not turn riders upside down.
What riding Steel Force is like
At 200 ft tall with 5,600 ft of track, Steel Force balances height and length: a main drop followed by a full circuit of hills and turns.
Opened in 1997, it is the 2nd oldest of the 8 coasters we list at Dorney Park.
Its 48 in minimum is the lowest of any coaster at Dorney Park (tied with 3 others), which makes it a natural first coaster there. Among extreme-class coasters on Coaster Map the median ride-alone minimum is about 51 in (130 cm), so this rule is lower than is typical for its class.
Going by RCDB's map positions, Steel Force sits on the west side of Dorney Park's coaster line-up. The nearest other coaster is Thunderhawk, roughly 130 m away (48 in minimum), so the two are easy to ride back to back. Next closest is Possessed at about 190 m. Distances are straight-line estimates from map coordinates, not walking routes.
Written from RCDB statistics and the park's published height rule; it describes the layout, not a review.
Steel Force layout, trains and ride system
To gain height it uses a chain lift hill.
Element by element, as listed on RCDB (3 entries):
- Chain Lift Hill
- Tunnel (120 ft long) ×2
Steel Force trains and ride system
| Trains | 3 trains with 6 cars per train. Riders are arranged 2 across in 3 rows for a total of 36 riders per train. |
|---|---|
| Riders per train | 36 |
| Hourly capacity (RCDB) | 1,700 riders per hour |
| Designer | Steve Okamoto |
On kid height: it appears on our 48-inch list and every taller list (54 in) as a ride-alone coaster.
More rides from D.H. Morgan Manufacturing, Inc. at other parks we cover: Steel Eel (SeaWorld San Antonio), Mamba (Worlds of Fun), Steel Dragon 2000 (Nagashima Spa Land) and Superman el Último Escape (Six Flags Mexico).
From the RCDB entry for Steel Force; elements are RCDB's list, not a ride-by-ride account.
Steel Force stats
| Minimum height | 48 in (122 cm) |
|---|---|
| Park thrill rating | 5 of 5 |
| Height | 200 ft |
| Drop | 205 ft |
| Top speed | 75 mph |
| Track length | 5,600 ft |
| Inversions | 0 |
| Ride time | 3:00 |
| Opened | 30 May 1997 |
| Manufacturer | D.H. Morgan Manufacturing, Inc. |
| Type | Steel, Sit Down, Extreme |
How intense is it?
Intense (extreme)
RCDB classes it as an extreme coaster; Dorney Park rates it 5 out of 5 on its own thrill scale.
Who is it for?
It suits confident thrill seekers who are comfortable with big forces and riders who prefer not to go upside down. Riders must be at least 48 in (122 cm) tall.
Best seat to ride
The back rows get pulled over each hill at speed, which gives the sharpest drops and most airtime; the front row trades some of that for a clear view of the track ahead.
General guidance from how this style of coaster moves, not a park rule. See best seat on a roller coaster.
How Steel Force compares
On our intensity ranking Steel Force is number 5 of 8 at Dorney Park, where 1 is the most intense. It is the tallest of the park's 8 coasters with a listed height.
If it sounds like too much, the next gentler coaster here is Thunderhawk (80 ft tall, 45 mph, no inversions; 48 in minimum). Ready for more? The next step up is Talon (135 ft tall, 58 mph, 4 inversions; 54 in minimum).
Across all 1486 coasters on Coaster Map, Steel Force is taller than 95% and faster than 96% of those with a listed figure.
If you liked Steel Force, try
Similar rides elsewhere on Coaster Map, matched on type, class, builder, size and inversions (the first is the nearest good match within about 700 km, where there is one):
- Skyrush at Hersheypark: same extreme class; 200 ft tall, 75 mph, no inversions; 54 in minimum
- Mamba at Worlds of Fun: also built by D.H. Morgan Manufacturing, Inc.; same extreme class; 205 ft tall, 75 mph, no inversions, 3.5 g; 48 in minimum
- Wild Thing at Valleyfair: also built by D.H. Morgan Manufacturing, Inc.; same extreme class; 207 ft tall, 74 mph, no inversions; 48 in minimum
Pins show approximate ride positions from RCDB map coordinates. Map data © OpenStreetMap contributors. A text list of every coaster is below the map.
Before you ride Steel Force
- Measure first: the ride-alone minimum is 48 in (122 cm). Height is checked at the entrance, so ask the ride team before you queue if your child is close.
- Loose items, health warnings and accessibility rules are set by the park and posted at the ride.
- Opening times and ride status: check the Dorney Park app or official site on the day.
Planning for a child? The ride height checker shows every coaster they can ride at Dorney Park.
Frequently asked questions
What is the height requirement for Steel Force?
Riders must be at least 48 in (122 cm) tall to ride Steel Force, according to Dorney Park, official ride page (checked 10 Nov 2026). Requirements can change, so confirm at the ride entrance.
How tall is Steel Force?
Steel Force is 200 ft tall, with a drop of 205 ft, according to RCDB.
How fast does Steel Force go?
Its top speed is 75 mph (121 km/h), according to RCDB.
Does Steel Force go upside down?
No. It has no inversions.
Is Steel Force scary?
It depends on the rider, but on intensity: RCDB classes it as an extreme coaster; Dorney Park rates it 5 out of 5 on its own thrill scale. That is RCDB's most intense class.
When did Steel Force open?
Steel Force opened on 30 May 1997.
Who built Steel Force?
Steel Force was manufactured by D.H. Morgan Manufacturing, Inc.
How long is the ride on Steel Force?
RCDB lists a ride time of 3 minutes over 5,600 ft of track.
How does Steel Force get up its first hill?
RCDB lists a chain lift hill; it has no launch.
How many people ride Steel Force at once?
RCDB's train details give 36 seats per train. RCDB lists an hourly capacity of about 1,700 riders.
Is Steel Force good for first-time riders?
On the numbers: RCDB classes it as extreme; it has no inversions; it tops out at 75 mph; the minimum height is 48 in. Most first-timers start with a family-class ride with no inversions, so this is better as a step up than a first coaster.
More coasters at Dorney Park
Sorted by ride-alone height, with the lowest height allowed with a companion and any maximum from the official rules.
- Iron Menace (48 in; max 78 in)
- Thunderhawk (48 in)
- Wild Mouse (48 in; 42 in with a companion; max 75 in)
- Possessed (52 in; max 78 in)
- Hydra the Revenge (54 in)
- Talon (54 in)
- Woodstock Express
Sources
- RCDB entry for Steel Force: stats, opening date, manufacturer, type and map position.
- Dorney Park, official ride page: height requirement, thrill rating (checked 10 Nov 2026).
- Dorney Park official site: hours, closures and current ride rules.
Last checked 10 Nov 2026. Found an error? Tell us.