Coaster Map

Phoenix

Knoebels Amusement Resort · Elysburg, Pennsylvania

Height requirement: 48 in (122 cm), or 42 to 48 in (107 to 122 cm) with a companion; top speed 45 mph; 78 ft tall; 0 inversions; opened 1985.

Phoenix is a wood sit-down roller coaster at Knoebels Amusement Resort in Elysburg, Pennsylvania, built by Philadelphia Toboggan Coasters, Inc. It opened on 15 Jun 1985. The ride stands 78 ft tall, drops 72 ft, reaches 45 mph and runs 3,200 ft of track. It is a wooden coaster, with a wooden track structure. It does not turn riders upside down.

What riding Phoenix is like

Phoenix spreads 3,200 ft of track across a layout only 78 ft tall, so expect a ride that keeps moving through turns and hills instead of saving everything for one drop.

Opened in 1985, it is the oldest of the 6 coasters we list at Knoebels Amusement Resort.

A rider who just meets its 48 in minimum can also ride 4 other coasters at Knoebels, out of 5 with verified rules. Among thrill-class coasters on Coaster Map the median ride-alone minimum is about 48 in (122 cm), so this rule is about typical for its class. Children from 42 to 48 in (107 to 122 cm) can ride with a companion, so a family can often ride together before a child is old enough to ride alone.

Going by RCDB's map positions, Phoenix sits on the south-west side of Knoebels' coaster line-up. The nearest other coaster is Flying Turns, roughly 140 m away (48 in minimum), so the two are easy to ride back to back. Next closest is Black Diamond at about 210 m. Distances are straight-line estimates from map coordinates, not walking routes.

Written from RCDB statistics and the park's published height rule; it describes the layout, not a review.

Phoenix layout, trains and ride system

Trains climb a chain lift hill.

These are the 2 elements RCDB records on Phoenix's track, in RCDB's order:

  1. Tunnel
  2. Chain Lift Hill

Phoenix trains and ride system

Trains2 trains with 4 cars per train. Riders are arranged 2 across in 3 rows for a total of 24 riders per train.
Riders per train24
DesignerHerbert Paul Schmeck
Previous locationsPlayland Park (as Rocket)

Phoenix has been relocated: RCDB records it operating at Playland Park as Rocket before Knoebels.

On kid height: it appears on our 48-inch list and every taller list (54 in) as a ride-alone coaster; a child of 42 in fits its companion band, so they can ride with an adult rather than alone.

Other Philadelphia Toboggan Coasters, Inc. coasters on Coaster Map: Woodstock Express (Kings Island), Racer 75 (Kings Dominion), Comet (Hersheypark) and Yankee Cannonball (Canobie Lake).

From the RCDB entry for Phoenix; elements are RCDB's list, not a ride-by-ride account.

Phoenix stats

Minimum height48 in (122 cm)
With a companion42 to 48 in (107 to 122 cm)
Height78 ft
Drop72 ft
Top speed45 mph
Track length3,200 ft
Inversions0
Ride time2:00
Opened15 Jun 1985
ManufacturerPhiladelphia Toboggan Coasters, Inc.
TypeWood, Sit Down, Thrill, Double Out and Back

How intense is it?

Moderate (thrill)

RCDB classes it as a thrill coaster.

Who is it for?

It suits riders who enjoy speed and turns but may not want the biggest drops in the park and riders who prefer not to go upside down. Riders must be at least 48 in (122 cm) tall, or 42 to 48 in (107 to 122 cm) with a companion.

Best seat to ride

The back rows get pulled over each hill at speed, which gives the sharpest drops and most airtime; the front row trades some of that for a clear view of the track ahead.

General guidance from how this style of coaster moves, not a park rule. See best seat on a roller coaster.

How Phoenix compares

On our intensity ranking Phoenix is number 3 of 6 at Knoebels Amusement Resort, where 1 is the most intense. It is the 3rd tallest of the park's 5 coasters with a listed height.

If it sounds like too much, the next gentler coaster here is Flying Turns (50 ft tall, 24 mph, no inversions; 48 in minimum). Ready for more? The next step up is Twister (101.6 ft tall, 51.5 mph, no inversions; 42 in minimum).

Site-wide, Phoenix is taller than 51% and faster than 48% of the 1486 coasters we cover that have a listed figure.

If you liked Phoenix, try

Similar rides elsewhere on Coaster Map, matched on type, class, builder, size and inversions (the first is the nearest good match within about 700 km, where there is one):

  • Thunderhawk at Dorney Park: also built by Philadelphia Toboggan Coasters, Inc.; also wooden; 80 ft tall, 45 mph, no inversions; 48 in minimum
  • Wildcat at Lake Compounce: also built by Philadelphia Toboggan Coasters, Inc.; also wooden; 85 ft tall, 48 mph, no inversions; 48 in minimum
  • Blue Streak at Cedar Point: also built by Philadelphia Toboggan Coasters, Inc.; also wooden; 78 ft tall, 40 mph, no inversions; 48 in minimum

Pins show approximate ride positions from RCDB map coordinates. Map data © OpenStreetMap contributors. A text list of every coaster is below the map.

Before you ride Phoenix

  • Measure first: the ride-alone minimum is 48 in (122 cm), and riders from 42 to 48 in (107 to 122 cm) need a companion. Height is checked at the entrance, so ask the ride team before you queue if your child is close.
  • Loose items, health warnings and accessibility rules are set by the park and posted at the ride.
  • Opening times and ride status: check the Knoebels Amusement Resort app or official site on the day.

Planning for a child? The ride height checker shows every coaster they can ride at Knoebels.

Keep reading

Frequently asked questions

What is the height requirement for Phoenix?

Riders must be at least 48 in (122 cm) tall to ride Phoenix, or 42 to 48 in (107 to 122 cm) with a companion, according to Knoebels, official ride page (checked 10 Nov 2026). Requirements can change, so confirm at the ride entrance.

How tall is Phoenix?

Phoenix is 78 ft tall, with a drop of 72 ft, according to RCDB.

How fast does Phoenix go?

Its top speed is 45 mph (72 km/h), according to RCDB.

Does Phoenix go upside down?

No. It has no inversions.

Is Phoenix scary?

It depends on the rider, but on intensity: RCDB classes it as a thrill coaster. Expect a lively ride that stops short of the most extreme coasters.

When did Phoenix open?

Phoenix opened on 15 Jun 1985.

Who built Phoenix?

Phoenix was manufactured by Philadelphia Toboggan Coasters, Inc.

How long is the ride on Phoenix?

RCDB lists a ride time of 2 minutes over 3,200 ft of track.

How does Phoenix get up its first hill?

RCDB lists a chain lift hill; it has no launch.

How many people ride Phoenix at once?

Each train carries 24 riders, according to RCDB.

Is Phoenix good for first-time riders?

On the numbers: RCDB classes it as thrill; it has no inversions; it tops out at 45 mph; the minimum height is 48 in. Most first-timers start with a family-class ride with no inversions, so this is better as a step up than a first coaster.

Where did Phoenix operate before?

RCDB records it at Playland Park (as Rocket).

Is Phoenix at Knoebels the same as Phoenix at Adventureland?

They share a name but are separate rides; the Knoebels ride opened in 1985 and the Adventureland ride in 2019; both list a 48 in minimum; RCDB lists heights of 78 ft and 50.9 ft.

More coasters at Knoebels Amusement Resort

Sorted by ride-alone height, with the lowest height allowed with a companion and any maximum from the official rules.

See the full Knoebels Amusement Resort coaster guide and map

Related guides

Sources

Last checked 10 Nov 2026. Found an error? Tell us.

New coaster alerts

Get a short email when we add a park or a new coaster opens. No spam; unsubscribe anytime.