Coaster Map

Timber Wolf

Worlds of Fun · Kansas City, Missouri

Height requirement: 48 in (122 cm); top speed 53 mph; 100 ft tall; 0 inversions; opened 1989.

Timber Wolf is a wood sit-down roller coaster at Worlds of Fun in Kansas City, Missouri, built by Dinn Corporation. It opened on 1 Apr 1989. The ride stands 100 ft tall, drops 95 ft, reaches 53 mph and runs 4,230 ft of track. It is a wooden coaster, with a wooden track structure. It does not turn riders upside down.

What riding Timber Wolf is like

Timber Wolf spreads 4,230 ft of track across a layout only 100 ft tall, so expect a ride that keeps moving through turns and hills instead of saving everything for one drop. RCDB lists a peak force of 2.8 g, below the 4 g median for coasters on Coaster Map with a g-force figure.

Opened in 1989, it is the oldest of the 7 coasters we list at Worlds of Fun.

Its 48 in minimum is the lowest of any coaster at Worlds of Fun (tied with 5 others), which makes it a natural first coaster there. Among extreme-class coasters on Coaster Map the median ride-alone minimum is about 51 in (130 cm), so this rule is lower than is typical for its class.

Going by RCDB's map positions, Timber Wolf sits on the south-west side of Worlds of Fun's coaster line-up. The nearest other coaster is Mamba, roughly 60 m away (48 in minimum), so the two are easy to ride back to back. Next closest is Patriot at about 340 m. Distances are straight-line estimates from map coordinates, not walking routes.

Written from RCDB statistics and the park's published height rule; it describes the layout, not a review.

Timber Wolf layout, trains and ride system

The ride begins with a chain lift hill.

RCDB lists 2 track elements for Timber Wolf, shown here in the order RCDB lists them:

  1. Chain Lift Hill
  2. Over-Banked Curve

Timber Wolf trains and ride system

Trains2 trains with 6 cars per train. Riders are arranged 2 across in 2 rows for a total of 24 riders per train.
Riders per train24
Hourly capacity (RCDB)904 riders per hour
DesignerCurtis D. Summers

For families checking heights: it appears on our 48-inch list and every taller list (54 in) as a ride-alone coaster.

Elsewhere, Dinn Corporation also built Wolverine Wildcat (Michigan's Adventure), Woodland Run (Kentucky Kingdom) and Predator (Six Flags Darien Lake).

From the RCDB entry for Timber Wolf; elements are RCDB's list, not a ride-by-ride account.

Timber Wolf stats

Minimum height48 in (122 cm)
Park thrill rating5 of 5
Height100 ft
Drop95 ft
Top speed53 mph
Track length4,230 ft
Inversions0
Max g-force2.8
Ride time2:13
Opened1 Apr 1989
ManufacturerDinn Corporation
TypeWood, Sit Down, Extreme

How intense is it?

Intense (extreme)

RCDB classes it as an extreme coaster; Worlds of Fun rates it 5 out of 5 on its own thrill scale.

Who is it for?

It suits confident thrill seekers who are comfortable with big forces and riders who prefer not to go upside down. Riders must be at least 48 in (122 cm) tall.

Best seat to ride

The back rows get pulled over each hill at speed, which gives the sharpest drops and most airtime; the front row trades some of that for a clear view of the track ahead.

General guidance from how this style of coaster moves, not a park rule. See best seat on a roller coaster.

How Timber Wolf compares

On our intensity ranking Timber Wolf is number 4 of 7 at Worlds of Fun, where 1 is the most intense. It is the 5th tallest of the park's 7 coasters with a listed height.

If it sounds like too much, the next gentler coaster here is Prowler (102.3 ft tall, 51.2 mph, no inversions; 48 in minimum). Ready for more? The next step up is Boomerang (116.5 ft tall, 47 mph, 3 inversions, 5.2 g; 48 in minimum).

Measured against every coaster on Coaster Map with a listed figure, Timber Wolf is taller than 65% and faster than 69% of them.

If you liked Timber Wolf, try

Similar rides elsewhere on Coaster Map, matched on type, class, builder, size and inversions (the first is the nearest good match within about 700 km, where there is one):

  • Renegade at Valleyfair: also wooden; same extreme class; 97.5 ft tall, 51.3 mph, no inversions; 48 in minimum
  • Mammut at Erlebnispark Tripsdrill: also wooden; same extreme class; 98.4 ft tall, 52.8 mph, no inversions, 3.5 g; 120 cm minimum
  • Thunderhead at Dollywood: also wooden; same extreme class; 100.4 ft tall, 53.7 mph, no inversions; 48 in minimum

Pins show approximate ride positions from RCDB map coordinates. Map data © OpenStreetMap contributors. A text list of every coaster is below the map.

Before you ride Timber Wolf

  • Measure first: the ride-alone minimum is 48 in (122 cm). Height is checked at the entrance, so ask the ride team before you queue if your child is close.
  • Loose items, health warnings and accessibility rules are set by the park and posted at the ride.
  • Opening times and ride status: check the Worlds of Fun app or official site on the day.

Planning for a child? The ride height checker shows every coaster they can ride at Worlds of Fun.

Keep reading

Frequently asked questions

What is the height requirement for Timber Wolf?

Riders must be at least 48 in (122 cm) tall to ride Timber Wolf, according to Worlds of Fun, official ride page (checked 10 Nov 2026). Requirements can change, so confirm at the ride entrance.

How tall is Timber Wolf?

Timber Wolf is 100 ft tall, with a drop of 95 ft, according to RCDB.

How fast does Timber Wolf go?

Its top speed is 53 mph (85 km/h), according to RCDB.

Does Timber Wolf go upside down?

No. It has no inversions.

Is Timber Wolf scary?

It depends on the rider, but on intensity: RCDB classes it as an extreme coaster; Worlds of Fun rates it 5 out of 5 on its own thrill scale. That is RCDB's most intense class.

When did Timber Wolf open?

Timber Wolf opened on 1 Apr 1989.

Who built Timber Wolf?

Timber Wolf was manufactured by Dinn Corporation.

How long is the ride on Timber Wolf?

RCDB lists a ride time of 2 minutes 13 seconds over 4,230 ft of track.

How does Timber Wolf get up its first hill?

RCDB lists a chain lift hill; it has no launch.

How many people ride Timber Wolf at once?

RCDB's train details give 24 seats per train. RCDB lists an hourly capacity of about 904 riders.

Is Timber Wolf good for first-time riders?

On the numbers: RCDB classes it as extreme; it has no inversions; it tops out at 53 mph; the minimum height is 48 in. Most first-timers start with a family-class ride with no inversions, so this is better as a step up than a first coaster.

More coasters at Worlds of Fun

Sorted by ride-alone height, with the lowest height allowed with a companion and any maximum from the official rules.

See the full Worlds of Fun coaster guide and map

Related guides

Sources

Last checked 10 Nov 2026. Found an error? Tell us.

New coaster alerts

Get a short email when we add a park or a new coaster opens. No spam; unsubscribe anytime.