The Smiler
Alton Towers · Alton, England
Height requirement: 140 cm (about 55.1 in); top speed 52.8 mph; 1 inversion; opened 2013.
The Smiler is a steel sit-down roller coaster at Alton Towers in Alton, England, built by Gerstlauer Amusement Rides GmbH. It opened on 31 May 2013. The ride drops 98.4 ft, reaches 52.8 mph and runs 3838.6 ft of track. It turns riders upside down 1 time.
What riding The Smiler is like
It goes upside down 1 time across 3,838.6 ft of track, so inversions are spaced out between other elements.
Opened in 2013, it is the 8th oldest of the 11 coasters we list at Alton Towers.
Its 140 cm minimum is the strictest at Alton Towers, shared with 4 other coasters. Among extreme-class coasters on Coaster Map the median ride-alone minimum is about 51 in (130 cm), so this rule is higher than is typical for its class.
Going by RCDB's map positions, The Smiler sits on the west side of Alton Towers' coaster line-up. The nearest other coaster is Oblivion, roughly 130 m away (140 cm minimum), so the two are easy to ride back to back. Next closest is Spinball Whizzer at about 170 m. Distances are straight-line estimates from map coordinates, not walking routes.
Written from RCDB statistics and the park's published height rule; it describes the layout, not a review.
The Smiler layout, trains and ride system
To gain height it uses a chain lift hill and a vertical chain lift.
These are the 14 elements RCDB records on The Smiler's track, in RCDB's order:
- Heartline Roll
- Chain Lift Hill
- Corkscrew
- Dive Loop ×2
- Reverse Sidewinder
- Sidewinder
- Corkscrew
- Vertical Chain Lift Hill
- Corkscrew
- Sea Serpent
- Cobra Roll
- Corkscrew ×2
RCDB counts 1 inversion in total; some elements, such as a cobra roll, turn riders over more than once.
The Smiler trains and ride system
| Trains | 4 trains with 4 cars per train. Riders are arranged 4 across in a single row for a total of 16 riders per train. |
|---|---|
| Riders per train | 16 |
For families checking heights: its 140 cm minimum is above all four of our kid-height lists (36, 42, 48 and 54 in), so it is for older children, teens and adults.
Other Gerstlauer Amusement Rides GmbH coasters on Coaster Map: Vildsvinet (BonBon-Land), Hydrus (Casino Pier), Mystic (Walibi Rhône-Alpes) and Tantrum (Six Flags Darien Lake). See all Gerstlauer Amusement Rides GmbH coasters.
From the RCDB entry for Smiler; elements are RCDB's list, not a ride-by-ride account.
The Smiler stats
| Minimum height | 140 cm (about 55.1 in) |
|---|---|
| Drop | 98.4 ft |
| Top speed | 52.8 mph |
| Track length | 3838.6 ft |
| Inversions | 1 |
| Ride time | 2:45 |
| Opened | 31 May 2013 |
| Manufacturer | Gerstlauer Amusement Rides GmbH |
| Model | Infinity Coaster / Custom |
| Type | Steel, Sit Down, Extreme |
How intense is it?
Intense (extreme)
RCDB classes it as an extreme coaster.
Who is it for?
It suits confident thrill seekers who are comfortable with big forces and riders happy to go upside down 1 time. Riders must be at least 140 cm (about 55.1 in) tall.
Best seat to ride
The back rows get pulled over each hill at speed, which gives the sharpest drops and most airtime; the front row trades some of that for a clear view of the track ahead.
General guidance from how this style of coaster moves, not a park rule. See best seat on a roller coaster.
How The Smiler compares
On our intensity ranking The Smiler is number 1 of 11 at Alton Towers, where 1 is the most intense.
If it sounds like too much, the next gentler coaster here is Rita (68.8 ft tall, 61.1 mph, no inversions, 4.7 g; 140 cm minimum).
Measured against every coaster on Coaster Map with a listed figure, The Smiler is faster than 68% of them.
If you liked The Smiler, try
Similar rides elsewhere on Coaster Map, matched on type, class, builder, size and inversions (the first is the nearest good match within about 700 km, where there is one):
- Vertika at La Récré des 3 Curés: also built by Gerstlauer Amusement Rides GmbH; same extreme class; 88.6 ft tall, 49.7 mph, 2 inversions; 130 cm minimum
- Incredicoaster at Disney California Adventure Park: same extreme class; 55 mph, 1 inversion; 48 in minimum
- Madagascar Mad Pursuit at Motiongate Dubai: the same Gerstlauer Amusement Rides GmbH Infinity Coaster / Custom model; same extreme class; 72.2 ft tall, 51.6 mph, no inversions; 125 cm minimum
Pins show approximate ride positions from RCDB map coordinates. Map data © OpenStreetMap contributors. A text list of every coaster is below the map.
Before you ride The Smiler
- Measure first: the ride-alone minimum is 140 cm (about 55.1 in). Height is checked at the entrance, so ask the ride team before you queue if your child is close.
- Secure glasses, phones and loose items before the 1 inversion; the park posts its loose-article rules at the ride.
- Opening times and ride status: check the Alton Towers app or official site on the day.
Planning for a child? The ride height checker shows every coaster they can ride at Alton Towers.
Frequently asked questions
What is the height requirement for The Smiler?
Riders must be at least 140 cm (about 55.1 in) tall to ride The Smiler, according to Alton Towers Resort, Height Restrictions page (checked 10 Nov 2026). Requirements can change, so confirm at the ride entrance.
How fast does The Smiler go?
Its top speed is 52.8 mph (85 km/h), according to RCDB.
Does The Smiler go upside down?
Yes. It has 1 inversion.
Is The Smiler scary?
It depends on the rider, but on intensity: RCDB classes it as an extreme coaster. That is RCDB's most intense class.
When did The Smiler open?
The Smiler opened on 31 May 2013.
Who built The Smiler?
The Smiler was manufactured by Gerstlauer Amusement Rides GmbH.
How long is the ride on The Smiler?
RCDB lists a ride time of 2 minutes 45 seconds over 3838.6 ft of track.
How does The Smiler get up its first hill?
RCDB lists a chain lift hill and a vertical chain lift; it has no launch.
How many people ride The Smiler at once?
RCDB's train details give 16 seats per train.
Is The Smiler good for first-time riders?
On the numbers: RCDB classes it as extreme; it goes upside down 1 time; it tops out at 52.8 mph; the minimum height is 140 cm. Most first-timers start with a family-class ride with no inversions, so this is better as a step up than a first coaster.
More coasters at Alton Towers
Sorted by ride-alone height, with the lowest height allowed with a companion and any maximum from the official rules.
- Bluey the Ride: Here Come the Grannies! (110 cm; 90 cm with a companion)
- Octonauts Rollercoaster Adventure (110 cm; 90 cm with a companion)
- Spinball Whizzer (120 cm; max 195 cm)
- TH13TEEN (120 cm; max 196 cm)
- Wicker Man (120 cm)
- Runaway Mine Train (130 cm; 110 cm with a companion)
- Galactica (140 cm)
- Nemesis Reborn (140 cm)
- Oblivion (140 cm)
- Rita (140 cm; max 195 cm)
Sources
- RCDB entry for Smiler: stats, opening date, manufacturer, type and map position.
- Alton Towers Resort, Height Restrictions page: height requirement (checked 10 Nov 2026).
- Alton Towers official site: hours, closures and current ride rules.
Last checked 10 Nov 2026. Found an error? Tell us.