Coaster Map

Phoenix

Adventureland Park · Altoona, Iowa

Height requirement: 48 in (122 cm); top speed 37.3 mph; 50.9 ft tall; 0 inversions; opened 2019.

Phoenix is a steel sit-down roller coaster at Adventureland Park in Altoona, Iowa, built by Maurer Rides GmbH. It opened on 4 Jul 2019. The ride stands 50.9 ft tall, reaches 37.3 mph and runs 1410.8 ft of track. The cars can spin freely as they travel, so no two rides feel quite the same. It does not turn riders upside down.

What riding Phoenix is like

Phoenix pairs a 50.9 ft structure with 1,410.8 ft of track, a classic proportion that gives a clear first drop and a full layout after it.

Opened in 2019, it is the 5th oldest of the 7 coasters we list at Adventureland Park. It is one of 7 rides on Coaster Map built to Maurer Rides GmbH's Spinning Coaster / SC 2000 design, and the 6th of them to open. Others include Laff Trakk at Hersheypark, Spider at Lagoon, Steel Dragon at Waldameer and Whirlwind at Seabreeze. Height rules for this model differ by park: Adventureland sets 48 in, while Hersheypark sets 42 in, Lagoon sets 50 in and Waldameer sets 50 in.

Its 48 in minimum is the strictest at Adventureland, shared with 5 other coasters. Among thrill-class coasters on Coaster Map the median ride-alone minimum is about 48 in (122 cm), so this rule is about typical for its class.

Going by RCDB's map positions, Phoenix sits on the north-east side of Adventureland's coaster line-up. The nearest other coaster is Flying Viking, roughly 100 m away (48 in minimum), so the two are easy to ride back to back. Next closest is Underground at about 100 m. Distances are straight-line estimates from map coordinates, not walking routes.

Written from RCDB statistics and the park's published height rule; it describes the layout, not a review.

Phoenix layout, trains and ride system

The ride begins with a chain lift hill.

RCDB lists one element for Phoenix:

  1. Chain Lift Hill

Phoenix trains and ride system

Trains5 cars. Riders are arranged 2 across in 2 rows for a total of 4 riders per car.
Riders per train4
Hourly capacity (RCDB)900 riders per hour

On kid height: it appears on our 48-inch list and every taller list (54 in) as a ride-alone coaster.

Other Maurer Rides GmbH coasters on Coaster Map: Sea Stallion (Six Flags Qiddiya), Salama (Linnanmäki), Wild Mouse (Dorney Park) and Now You See Me: High Roller (Motiongate).

From the RCDB entry for Phoenix; elements are RCDB's list, not a ride-by-ride account.

Phoenix stats

Minimum height48 in (122 cm)
Height50.9 ft
Top speed37.3 mph
Track length1410.8 ft
Inversions0
Opened4 Jul 2019
ManufacturerMaurer Rides GmbH
ModelSpinning Coaster / SC 2000
TypeSteel, Sit Down, Thrill, Spinning Cars

How intense is it?

Moderate (thrill)

RCDB classes it as a thrill coaster.

Who is it for?

It suits riders who enjoy speed and turns but may not want the biggest drops in the park and riders who prefer not to go upside down. Riders must be at least 48 in (122 cm) tall.

Best seat to ride

Seat choice matters less on a spinning coaster: how much the car spins depends on how the weight is spread around it, so every ride is different.

General guidance from how this style of coaster moves, not a park rule. See best seat on a roller coaster.

How Phoenix compares

On our intensity ranking Phoenix is number 5 of 7 at Adventureland Park, where 1 is the most intense. It is the 5th tallest of the park's 7 coasters with a listed height.

If it sounds like too much, the next gentler coaster here is Flying Viking (50 ft tall, 26.1 mph, no inversions; 48 in minimum). Ready for more? The next step up is Outlaw (67 ft tall, 48 mph, no inversions; 48 in minimum).

Measured against every coaster on Coaster Map with a listed figure, Phoenix is taller than 32% and faster than 33% of them.

If you liked Phoenix, try

Similar rides elsewhere on Coaster Map, matched on type, class, builder, size and inversions (the first is the nearest good match within about 700 km, where there is one):

Pins show approximate ride positions from RCDB map coordinates. Map data © OpenStreetMap contributors. A text list of every coaster is below the map.

Before you ride Phoenix

  • Measure first: the ride-alone minimum is 48 in (122 cm). Height is checked at the entrance, so ask the ride team before you queue if your child is close.
  • If you get motion sick, note that this ride spins. See our motion sickness tips.
  • Opening times and ride status: check the Adventureland Park app or official site on the day.

Planning for a child? The ride height checker shows every coaster they can ride at Adventureland.

Keep reading

Frequently asked questions

What is the height requirement for Phoenix?

Riders must be at least 48 in (122 cm) tall to ride Phoenix, according to Adventureland, official ride page (checked 10 Nov 2026). Requirements can change, so confirm at the ride entrance.

How tall is Phoenix?

Phoenix is 50.9 ft tall, according to RCDB.

How fast does Phoenix go?

Its top speed is 37.3 mph (60 km/h), according to RCDB.

Does Phoenix go upside down?

No. It has no inversions.

Is Phoenix scary?

It depends on the rider, but on intensity: RCDB classes it as a thrill coaster. Expect a lively ride that stops short of the most extreme coasters.

When did Phoenix open?

Phoenix opened on 4 Jul 2019.

Who built Phoenix?

Phoenix was manufactured by Maurer Rides GmbH.

How long is the track on Phoenix?

RCDB lists 1410.8 ft of track.

How does Phoenix get up its first hill?

RCDB lists a chain lift hill; it has no launch.

How many people ride Phoenix at once?

Each train carries 4 riders, according to RCDB. RCDB lists an hourly capacity of about 900 riders.

Is Phoenix good for first-time riders?

On the numbers: RCDB classes it as thrill; it has no inversions; it tops out at 37.3 mph; the minimum height is 48 in. Most first-timers start with a family-class ride with no inversions, so this is better as a step up than a first coaster.

Is Phoenix at Adventureland the same as Spider at Lagoon?

Both are Maurer Rides GmbH Spinning Coaster / SC 2000 coasters on RCDB; the Adventureland ride opened in 2019 and the Lagoon ride in 2003; Adventureland sets 48 in and Lagoon sets 50 in; RCDB lists heights of 50.9 ft and 50.8 ft.

More coasters at Adventureland Park

Sorted by ride-alone height, with the lowest height allowed with a companion and any maximum from the official rules.

See the full Adventureland Park coaster guide and map

Related guides

Sources

Last checked 10 Nov 2026. Found an error? Tell us.

New coaster alerts

Get a short email when we add a park or a new coaster opens. No spam; unsubscribe anytime.