Corkscrew
Valleyfair · Shakopee, Minnesota
Height requirement: 48 in (122 cm); top speed 50 mph; 85 ft tall; 3 inversions; opened 1980.
Corkscrew is a steel sit-down roller coaster at Valleyfair in Shakopee, Minnesota, built by Arrow Dynamics. It opened in 1980. The ride stands 85 ft tall, reaches 50 mph and runs 1,950 ft of track. It turns riders upside down 3 times.
What riding Corkscrew is like
Corkscrew pairs a 85 ft structure with 1,950 ft of track, a classic proportion that gives a clear first drop and a full layout after it. It goes upside down 3 times across 1,950 ft of track, so inversions are spaced out between other elements.
Opened in 1980, it is the 2nd oldest of the 8 coasters we list at Valleyfair.
A rider who just meets its 48 in minimum can also ride 6 other coasters at Valleyfair, out of 7 with verified rules. Among extreme-class coasters on Coaster Map the median ride-alone minimum is about 51 in (130 cm), so this rule is lower than is typical for its class.
Going by RCDB's map positions, Corkscrew sits on the east side of Valleyfair's coaster line-up. The nearest other coaster is Cosmic Coaster, roughly 120 m away (42 in minimum), so the two are easy to ride back to back. Next closest is High Roller at about 160 m. Distances are straight-line estimates from map coordinates, not walking routes.
Written from RCDB statistics and the park's published height rule; it describes the layout, not a review.
Corkscrew layout, trains and ride system
The ride begins with a chain lift hill.
These are the 3 elements RCDB records on Corkscrew's track, in RCDB's order:
RCDB counts 3 inversions in total; some elements, such as a cobra roll, turn riders over more than once.
Corkscrew trains and ride system
| Trains | 6 cars per train. Riders are arranged 2 across in 2 rows for a total of 24 riders per train. |
|---|---|
| Riders per train | 24 |
| Hourly capacity (RCDB) | 1,300 riders per hour |
For families checking heights: it appears on our 48-inch list and every taller list (54 in) as a ride-alone coaster.
Elsewhere, Arrow Dynamics also built Corkscrew (Rusutsu), Viper (Six Flags Darien Lake), Demon (California's Great America) and Loch Ness Monster (Busch Gardens Williamsburg). See all Arrow Dynamics coasters.
From the RCDB entry for Corkscrew; elements are RCDB's list, not a ride-by-ride account.
Corkscrew stats
| Minimum height | 48 in (122 cm) |
|---|---|
| Park thrill rating | 5 of 5 |
| Height | 85 ft |
| Top speed | 50 mph |
| Track length | 1,950 ft |
| Inversions | 3 |
| Ride time | 1:30 |
| Opened | 1980 |
| Manufacturer | Arrow Dynamics |
| Model | Custom Looping Coaster |
| Type | Steel, Sit Down, Extreme |
How intense is it?
Intense (extreme)
RCDB classes it as an extreme coaster; Valleyfair rates it 5 out of 5 on its own thrill scale.
Who is it for?
It suits confident thrill seekers who are comfortable with big forces and riders happy to go upside down 3 times. Riders must be at least 48 in (122 cm) tall.
Best seat to ride
For the strongest airtime, sit near the back: the cars ahead pull the back of the train over each crest faster, so you leave your seat sooner on the drops. For the best view of what is coming, sit in the front row.
General guidance from how this style of coaster moves, not a park rule. See best seat on a roller coaster.
How Corkscrew compares
On our intensity ranking Corkscrew is number 3 of 8 at Valleyfair, where 1 is the most intense. It is the 5th tallest of the park's 7 coasters with a listed height.
If it sounds like too much, the next gentler coaster here is Renegade (97.5 ft tall, 51.3 mph, no inversions; 48 in minimum). Ready for more? The next step up is Wild Thing (207 ft tall, 74 mph, no inversions; 48 in minimum).
Site-wide, Corkscrew is taller than 56% and faster than 62% of the 1486 coasters we cover that have a listed figure.
If you liked Corkscrew, try
Similar rides elsewhere on Coaster Map, matched on type, class, builder, size and inversions (the first is the nearest good match within about 700 km, where there is one):
- Demon at Six Flags Great America: the same Arrow Dynamics Custom Looping Coaster model; same extreme class; 103.7 ft tall, 50 mph, 4 inversions; 48 in minimum
- Dragon Fyre at Canada's Wonderland: the same Arrow Dynamics Custom Looping Coaster model; same extreme class; 78 ft tall, 50 mph, 4 inversions; 48 in minimum
- Demon at California's Great America: the same Arrow Dynamics Custom Looping Coaster model; same extreme class; 102 ft tall, 50 mph, 4 inversions; 48 in minimum
Pins show approximate ride positions from RCDB map coordinates. Map data © OpenStreetMap contributors. A text list of every coaster is below the map.
Before you ride Corkscrew
- Measure first: the ride-alone minimum is 48 in (122 cm). Height is checked at the entrance, so ask the ride team before you queue if your child is close.
- Secure glasses, phones and loose items before the 3 inversions; the park posts its loose-article rules at the ride.
- Opening times and ride status: check the Valleyfair app or official site on the day.
Planning for a child? The ride height checker shows every coaster they can ride at Valleyfair.
Frequently asked questions
What is the height requirement for Corkscrew?
Riders must be at least 48 in (122 cm) tall to ride Corkscrew, according to Valleyfair, official ride page (checked 10 Nov 2026). Requirements can change, so confirm at the ride entrance.
How tall is Corkscrew?
Corkscrew is 85 ft tall, according to RCDB.
How fast does Corkscrew go?
Its top speed is 50 mph (80 km/h), according to RCDB.
Does Corkscrew go upside down?
Yes. It has 3 inversions.
Is Corkscrew scary?
It depends on the rider, but on intensity: RCDB classes it as an extreme coaster; Valleyfair rates it 5 out of 5 on its own thrill scale. That is RCDB's most intense class.
When did Corkscrew open?
Corkscrew opened in 1980.
Who built Corkscrew?
Corkscrew was manufactured by Arrow Dynamics.
How long is the ride on Corkscrew?
RCDB lists a ride time of 1 minute 30 seconds over 1,950 ft of track.
How does Corkscrew get up its first hill?
RCDB lists a chain lift hill; it has no launch.
How many people ride Corkscrew at once?
RCDB's train details give 24 seats per train. RCDB lists an hourly capacity of about 1,300 riders.
Is Corkscrew good for first-time riders?
On the numbers: RCDB classes it as extreme; it goes upside down 3 times; it tops out at 50 mph; the minimum height is 48 in. Most first-timers start with a family-class ride with no inversions, so this is better as a step up than a first coaster.
Is Corkscrew at Valleyfair the same as Corkscrew at Cedar Point?
Both are Arrow Dynamics Custom Looping Coaster coasters on RCDB; the Valleyfair ride opened in 1980 and the Cedar Point ride in 1976; both list a 48 in minimum.
More coasters at Valleyfair
Sorted by ride-alone height, with the lowest height allowed with a companion and any maximum from the official rules.
- Cosmic Coaster (42 in)
- Excalibur (48 in)
- High Roller (48 in)
- Mad Mouse (48 in; 42 in with a companion)
- Renegade (48 in)
- Wild Thing (48 in)
- Steel Venom (52 in)
Sources
- RCDB entry for Corkscrew: stats, opening date, manufacturer, type and map position.
- Valleyfair, official ride page: height requirement, thrill rating (checked 10 Nov 2026).
- Valleyfair official site: hours, closures and current ride rules.
Last checked 10 Nov 2026. Found an error? Tell us.