Coaster Map

Runaway Mine Train

Six Flags Over Texas · Arlington, Texas

Height requirement: 48 in (122 cm); 35 ft tall; 0 inversions; opened 1966.

Runaway Mine Train is a steel sit-down roller coaster at Six Flags Over Texas in Arlington, Texas, built by Arrow Dynamics. It first opened on 23 Jul 1966 and was previously known as Run-A-Way Mine Train and later Mine Train. The ride stands 35 ft tall and runs 2,485 ft of track. It is a hybrid coaster, mixing wooden and steel construction. It does not turn riders upside down.

What riding Runaway Mine Train is like

Runaway Mine Train spreads 2,485 ft of track across a layout only 35 ft tall, so expect a ride that keeps moving through turns and hills instead of saving everything for one drop.

Opened in 1966, it is the oldest of the 13 coasters we list at Six Flags Over Texas. It has run under other names (Run-A-Way Mine Train, then Mine Train), so older guides and photos may use those. It is one of 15 rides on Coaster Map built to Arrow Dynamics's Mine Train design, and the first of them to open. Others include Cedar Creek Mine Ride at Cedar Point, Gold Rusher at Magic Mountain, Adventure Express at Kings Island and Trailblazer at Hersheypark. Height rules for this model differ by park: Six Flags Over Texas sets 48 in, while Hersheypark sets 36 in, Six Flags Great Adventure sets 44 in and PortAventura Park sets 140 cm.

A rider who just meets its 48 in minimum can also ride 10 other coasters at Six Flags Over Texas, out of 12 with verified rules. Among thrill-class coasters on Coaster Map the median ride-alone minimum is about 48 in (122 cm), so this rule is about typical for its class.

Going by RCDB's map positions, Runaway Mine Train sits on the north-east side of Six Flags Over Texas' coaster line-up. The nearest other coaster is Mini Mine Train, roughly 30 m away (42 in minimum), so the two are easy to ride back to back. Next closest is Mr. Freeze at about 80 m. Distances are straight-line estimates from map coordinates, not walking routes.

Written from RCDB statistics and the park's published height rule; it describes the layout, not a review.

Runaway Mine Train layout, trains and ride system

The ride begins with a chain lift hill.

These are the 5 elements RCDB records on Runaway Mine Train's track, in RCDB's order:

  1. Chain Lift Hill
  2. Tunnel
  3. Chain Lift Hill
  4. Tunnel
  5. Chain Lift Hill

Runaway Mine Train trains and ride system

Trains3 trains with 5 cars per train. Riders are arranged 2 across in 3 rows for a total of 30 riders per train.
Riders per train30

On kid height: it appears on our 48-inch list and every taller list (54 in) as a ride-alone coaster.

More rides from Arrow Dynamics at other parks we cover: Vortex (Calaway Park), Steeplechase (Blackpool Pleasure Beach), Corkscrew (Nagashima Spa Land) and Cork Screw (Benyland). See all Arrow Dynamics coasters.

From the RCDB entry for Runaway Mine Train; elements are RCDB's list, not a ride-by-ride account.

Runaway Mine Train stats

Minimum height48 in (122 cm)
Park thrill rating3 of 5
Height35 ft
Track length2,485 ft
Inversions0
Ride time3:00
Opened23 Jul 1966
ManufacturerArrow Dynamics
ModelMine Train
TypeSteel, Sit Down, Thrill, Hybrid

How intense is it?

Moderate (thrill)

RCDB classes it as a thrill coaster; Six Flags Over Texas rates it 3 out of 5 on its own thrill scale.

Who is it for?

It suits riders who enjoy speed and turns but may not want the biggest drops in the park and riders who prefer not to go upside down. Riders must be at least 48 in (122 cm) tall.

Best seat to ride

The back rows get pulled over each hill at speed, which gives the sharpest drops and most airtime; the front row trades some of that for a clear view of the track ahead.

General guidance from how this style of coaster moves, not a park rule. See best seat on a roller coaster.

How Runaway Mine Train compares

On our intensity ranking Runaway Mine Train is number 11 of 13 at Six Flags Over Texas, where 1 is the most intense. It is the 11th tallest of the park's 13 coasters with a listed height.

If it sounds like too much, the next gentler coaster here is Mini Mine Train (20 ft tall, no inversions; 42 in minimum). Ready for more? The next step up is Pandemonium (53 ft tall, 31 mph, no inversions; 47 in minimum).

Measured against every coaster on Coaster Map with a listed figure, Runaway Mine Train is taller than 16% of them.

If you liked Runaway Mine Train, try

Similar rides elsewhere on Coaster Map, matched on type, class, builder, size and inversions (the first is the nearest good match within about 700 km, where there is one):

Pins show approximate ride positions from RCDB map coordinates. Map data © OpenStreetMap contributors. A text list of every coaster is below the map.

Before you ride Runaway Mine Train

  • Measure first: the ride-alone minimum is 48 in (122 cm). Height is checked at the entrance, so ask the ride team before you queue if your child is close.
  • Loose items, health warnings and accessibility rules are set by the park and posted at the ride.
  • Opening times and ride status: check the Six Flags Over Texas app or official site on the day.

Planning for a child? The ride height checker shows every coaster they can ride at Six Flags Over Texas.

Keep reading

Frequently asked questions

What is the height requirement for Runaway Mine Train?

Riders must be at least 48 in (122 cm) tall to ride Runaway Mine Train, according to Six Flags Over Texas, official ride page (checked 16 Nov 2026). Requirements can change, so confirm at the ride entrance.

How tall is Runaway Mine Train?

Runaway Mine Train is 35 ft tall, according to RCDB.

Does Runaway Mine Train go upside down?

No. It has no inversions.

Is Runaway Mine Train scary?

It depends on the rider, but on intensity: RCDB classes it as a thrill coaster; Six Flags Over Texas rates it 3 out of 5 on its own thrill scale. Expect a lively ride that stops short of the most extreme coasters.

When did Runaway Mine Train open?

Runaway Mine Train opened on 23 Jul 1966 (previously known as Run-A-Way Mine Train and later Mine Train).

Who built Runaway Mine Train?

Runaway Mine Train was manufactured by Arrow Dynamics.

How long is the ride on Runaway Mine Train?

RCDB lists a ride time of 3 minutes over 2,485 ft of track.

How does Runaway Mine Train get up its first hill?

RCDB lists a chain lift hill; it has no launch.

How many people ride Runaway Mine Train at once?

Up to 30 per train, going by RCDB's train layout.

Is Runaway Mine Train good for first-time riders?

On the numbers: RCDB classes it as thrill; it has no inversions; the minimum height is 48 in. Most first-timers start with a family-class ride with no inversions, so this is better as a step up than a first coaster.

Is Runaway Mine Train at Six Flags Over Texas the same as Dahlonega Mine Train at Six Flags Over Georgia?

Both are Arrow Dynamics Mine Train coasters on RCDB; the Six Flags Over Texas ride opened in 1966 and the Six Flags Over Georgia ride in 1967; both list a 48 in minimum; RCDB lists heights of 35 ft and 37 ft.

More coasters at Six Flags Over Texas

Sorted by ride-alone height, with the lowest height allowed with a companion and any maximum from the official rules.

See the full Six Flags Over Texas coaster guide and map

Related guides

Sources

Last checked 16 Nov 2026. Found an error? Tell us.

New coaster alerts

Get a short email when we add a park or a new coaster opens. No spam; unsubscribe anytime.